1
E-flite Diamante 5e ARF Assembly Manual
13. Use 6-minute epoxy to glue the tail wheel assembly
into the pre-cut slot in the aft end of the fuselage.
14. Slide the fin into the slot in the aft end of the
fuselage. Press the fin tight against the end of the
fuselage, as it can rock forward in the slot.
Note
: The aft edge of the fin will be parallel to the aft
end of the fuselage when positioned correctly.
15. Use a square to make sure the vertical fin is square
to the stabilizer.
16. Use a felt-tipped pen to trace the outline of the
fuselage onto the fin with the fin in correct alignment.
Use a square to make sure the vertical fin is square
to the stabilizer.