background image

EN

Replacement Parts

Here is a list of replacement parts to repair or keep your Carbon-Z Yak 54 flying. These parts are available at your 

local hobby shop or from Horizon Hobby (www.horizonhobby.com). Please try your local hobby shop first. By 

supporting them, they will be there when you need them. Or you can call our consumer sales 

line at 1 800 338 4639.

Number

Description

Notes

EFLA1060

60-Amp Pro Switch-Mode BEC Brushless ESC

This is the ESC for the Carbon-Z Yak 54

EFLB28004S30

E-Flite 2800mAh 14.8V 30C Li-Po battery

Recommended for size, weight and power in Carbon-Z Yak 54 BNF

EFLC3015

3- to 4-cell 12V DC Li-Po Battery Charger with 
Balancer

This is the charger included in the Carbon-Z Yak 54 BNF

EFLM7300

BL25 Brushless Outrunner Motor, 1000Kv

EFLM7301

Motor Shaft: BL25 Outrunner

EFLM7302

Prop Adapter: Carbon-Z Yak 54

EFLP12525E

12 x 5.25 Prop: Carbon-Z Yak 54

EFL1008001

Right Wing Panel: Carbon-Z Yak 54

Includes right wing panel, right aileron, hinges and control horn

EFL1008002

Left Wing Panel: Carbon-Z Yak 54

Includes left wing panel, left aileron, hinges and control horn

EFL1008003

Painted Fuselage: Carbon-Z Yak 54

Includes fuselage, vertical fi n, fi rewall, canopy,  and landing 
gear mount

EFL1008004

Horizontal Stabilizer, Right: Carbon-Z Yak 54

Includes right horizontal stabilizer, right elevator, hinges and control 
horns

EFL1008005   

Horizontal Stabilizer, Left: Carbon-Z Yak 54

Includes left horizontal stabilizer, left elevator, hinges

EFL1008006  

Rudder: Carbon-Z Yak 54

Includes rudder, hinges and control horn

EFL1008007

Battery Hatch: Carbon-Z Yak 54

Includes the battery hatch and magnets

EFL1008008

Radio Hatch: Carbon-Z Yak 54

Includes the radio hatch

EFL1008009

Canopy: Carbon-Z Yak 54

EFL1008010

Wheel Pants: Carbon-Z Yak 54

EFL1008011

Pushrods with Clevis: Carbon-Z Yak 54

EFL1008012

Carbon Fiber Wing Tube: Carbon-Z Yak 54

EFL1008013

Carbon Fiber Stabilizer Tube: Carbon-Z Yak 54

EFL1008014

Pilot: Carbon-Z Yak 54

EFL1008015

Landing Gear Plates: Carbon-Z Yak 54

EFL1008016

Main Landing Gear Wire: Carbon-Z Yak 54

EFL1008017

Landing Gear Fairings: Carbon-Z Yak 54

EFL1008018

Main Wheels: Carbon-Z Yak 54

EFL1008019

Tail Wheel Set: Carbon-Z Yak 54

EFL1008020

Spinner: Carbon-Z Yak 54

EFL1008021

Servo Arm: Carbon-Z Yak 54

EFL1008022

Decal Sheet: Carbon-Z Yak 54

EFL1008023

Servo Extension Set: Carbon-Z Yak 54

Includes servo extensions for ailerons, elevator, rudder and ESC

EFL1008024

Motor Mount with Screws: Carbon-Z Yak 54

Includes motor mount, motor screws and fi rewall screws

EFL1008025

Screw Set: Carbon-Z Yak 54

Includes all screws for the airframe. Individual parts do not include 
screws except where noted.

Note:

 When replacing servos, we recommend tying a string to the servo lead before removing the servo. 

This allows you to easily reinstall the servo and lead.

16

Содержание CARBON-Z YAK 54




















Отзывы: