background image

 

 

5-6 Agecroft Trading Estate, Langley Road, Salford Manchester M6 6JD 

Tel:

 +44 161 737 5099 

Website

:

 

www.play-learn.co.uk 

Help & Support:

 [email protected] 

Page 

1

 of 

4

 

Product Name: 

1m Bubble Tube with Floating Beads 

 

Product Code:  

BT100C 

 
Specification 

Size: H100cm (including base) x Base Dia 15cm (Approx.) 
Weight: 3.2kg without water (approx.)  
Material: Tube: Acrylic Base: Stainless Steel 
LED: non 

 replaceable multi coloured LEDs 

Transformer rating 
Input: 230 

 240V 

 50Hz 

Output: 12Vac 

 750mA 9.0VA 

 
Contents:  
 

1.

 

Bubble Tube 

 

 

 

 

2.

 

Adaptor 

3.

 

Remote Control (Include 1 x CR2025 Lithium Cell Battery) 

4.

 

A pack of beads 

5.

 

Lid Cover 

 

Tools required: 

 
Distilled Water 
 

WARNING!  
 

 

Contains sequences of flashing lights may affect individuals who are susceptible to photosensitive 
epilepsy or other photosensitivities.   

 

This product is not a toy, to be used under adult supervision only. Small parts included could 
potentially cause a choking hazard.  

 

Safety Warnings: 

 

 

Before you start, please read these instructions carefully and retain for future reference. Check the 
contents inside the packaging and ensure you have all the required parts listed and there are no 
missing parts. If any parts are missing 

DO NOT

 attempt to assemble the product.

 

 

Before setting up, ensure the product is not damaged. If any part of the product is damaged, do not 
attempt to assemble and use. 

 

Do not attempt to hardwire this product to the mains electrical supply. It operates using an adaptor. 

 

 

Only use the adaptor supplied with this product and no other adaptor must be used. 

 

This product contains non-replaceable LEDs. If any of the LEDs cease functioning, the whole unit must 
be disposed of according to your local council guidelines.   

 

This is not a toy. Contains small parts, potentially may cause choking hazard, keep away from children 
and pets during assembly. 

 

Remove all packaging before setup. Do not operate in packaging 

 

Keep away from heat sources or naked flame 

 

Ensure cable is placed such that no trip, entanglement or strangulations hazards are likely to occur 

 

DO NOT

 use live fish in this tube. 

 

DO NOT

 attempt to move the product when filled with water or when plugged to the mains.  

 

ALWAYS

 disconnect from the mains when cleaning or changing the water.  

 

This product contains moving parts, some noise and vibration is expected.  

 

This product is not intended for use by persons (including children) with reduced physical, sensory 
and mental capacities, or lack of experience and knowledge, unless they are been supervised by a 
competent person responsible for their safety.  

Summary of Contents for BT100C

Page 1: ...e missing DO NOT attempt to assemble the product Before setting up ensure the product is not damaged If any part of the product is damaged do not attempt to assemble and use Do not attempt to hardwire this product to the mains electrical supply It operates using an adaptor Only use the adaptor supplied with this product and no other adaptor must be used This product contains non replaceable LEDs I...

Page 2: ...here you wish to place this product and stand in position 3 Once in position gently fill the acrylic tube with water until the water level is approximately 1 2 from the rim 4 Add the beads to the bubble tube 5 Plug the adapter in the black jack socket at the base and plug the other end into the wall socket 6 Using your remote to control the lights and mode Remote Control Functions To change the ba...

Page 3: ...mote control try going a little closer to the bubble wall If it still does not work please change the battery If this fails to fix the problem contact the manufacturer for a replacement remote If the new remote still does not fix the problem the controller box may need replacing Please contact us for further help Warranty Information Thank you for choosing our product All of our products are const...

Page 4: ... Batteries should only be inserted or changed by an adult Do not use rechargeable batteries Non rechargeable batteries are not to be recharged Be sure to insert batteries with the correct polarities and always follow the product and battery manufacturers instructions Remove batteries from product before extended storage Always remove old or exhausted batteries from the product The supply terminals...

Reviews: