5. Check the alignment of the stabilizer to the front
of the fuselage. The distances between a point
centered on the fuselage to either stabilizer tip
should be the same.
6. Once satisfied with the stabilizer alignment,
use foam-safe CA to glue the stabilizer to the
fuselage. Clean up excess glue with a tissue or
paper towel.
Note
: You can use foam-safe Activator to speed
up this CA cure time.
20
Содержание Byp Yak
Страница 1: ...Byp Yak Assembly Manual...
Страница 25: ...1 Use hot glue to install the rudder elevator and aileron servos 25...