E-FLITE Byp Yak, Инструкция по сборке

Страница: 26 / 40


2. Plug the elevator, rudder, aileron and ESC into
the receiver and check their operation. Use hook
and loop to attach the receiver to the inside of
the fuselage. Use a short 3" (76mm) extension for
the speed control if needed.

3. Route the antenna to the tail and then back up
the opposite side of the fuselage. Do not cut the
antenna as this will reduce the range of your
radio system.

4. Install the six micro control connectors into each
of the three long servo arms. Secure them using
the control connector back plates.
26