E-FLITE Byp Yak, Инструкция по сборке

Страница: 21 / 40


7. Use foam-safe CA to glue the plywood rudder
horn into position
Note : Ensure that the holes in the control horn
are in line with the hinge line.
Note : Do not use CA on the hinges until you
are sure the fit of the rudder is correct.

8. Test fit the rudder to the fuselage. Check that
when the hinge line of the rudder is against the
fuselage, the balance tab does not interfere with
the fin.

9. Once satisfied with the fit, apply 2–3 drops of
foam-safe CA to each side of each rudder hinge.
Work quickly to install the rudder before the CA
has time to cure.
21