ALIGNMENT PROCEDURE
6-3
- Selects the Partial Tune mode the same as
the Transfer > Tune Partial menu (see Section
6.3.3) This mode allows manual selection of
the desired Tune Category and then automati-
cally steps through the various settings for that
adjustment.
- Selects the Edit Mode which allows parame-
ters in the selected screen to be changed
without stepping through each adjustment.
- Reads and displays the current parameters
programmed in the radio the same as the Radio
> Read Tune Parameters menu (see Section
6.3.3).
- Writes the current tune parameters to the
radio the same as the Transfer > Write Tune
Parameters menu (see Section 6.3.3). This
occurs automatically when a Partial Tune
adjustment is completed.
- Exits the current Tune Category without
writing parameters to the radio.
Radio Information
When tuning parameters are read from a radio by
clicking the
button or selecting the Transfer >
Read Parameters menu, the following information is
displayed in the top part of the screen:
Type - The Radio Series selected by the Radio
menu (see Section 6.3.2). The correct series must
be selected for communication with the radio to
occur.
Band - The radio frequency band of the radio
displayed after information is read from radio. Do
not select the band using Tools > Set Band (Section
6.3.4) because this may make the radio nonfunc-
tional.
Software DSP - The first number is the version
number of the radio firmware (Flash/operating
code), and the second number is the version
number of the DSP software.
ESN - The Electronic Serial Number electronically
stored in the radio.
Tuning Categories
These buttons select the tuning adjustment to be
performed. Different functions are displayed for the
51xx and 53xx. If the Partial tune mode is selected,
these buttons select the particular adjustment that is
performed.
Mode/Tool Tip
Information on the bottom line of the screen indi-
cates the current tune mode and information on the
selected button on other information.
6.3 MENU BAR DESCRIPTION
6.3.1 FILE MENU
Selecting File > Exit closes the PCTune program.
6.3.2 RADIO MENU
The Radio menu shown above selects the radio
type. Also select “5100” for the 51SL and Ascend
portable, and also select “5300” for the 53SL and
Ascend mobile. The correct radio type must be
selected for communication with the radio to occur.
6.3.3 TRANSFER MENU
COM Ports -
Displays the following screen which
selects the serial port (1-12) and baud rate (9600/
19200) used for communication with the radio. Select
the computer port to which the test cable is connected
(see Section 6.4.1), and 19200 baud is normally
Содержание 5100 Series
