Dynatron Dynatronics ibox, Руководство оператора

Страница: 9 / 35

9 Dynatron® ibox™ Operator’s Manual
|
Rev. 2
|
5/14/2019 The Dynatron® ibox™ Iontophoresis Device
table of contents symbols & labels limited warranty prev
< >
next prev topic
< < >>
next topic
7.
SELECTOR ARROW KEYS:
The selector arrow keys allow the user
to enter treatment parameters (polarity,
mode, and dose) for a treatment(s) and
control the current intensity of an
ongoing treatment. These keys also
allow treatments to be started either
normally, or start the treatment again
following the correction of a particular
electrode error code. Additionally,
they control the adjustment of default parameters during setup.
The “Up Arrow” key controls increasing of a particular parameter while
the “Down Arrow” key controls the decreasing of a parameter.
Holding down any of the selector arrow keys typically causes the
parameter in focus to increase or decrease its value in an accelerated
fashion.
8.
ENTER KEY:
The enter key causes a treatment
parameter, currently being modified by the user,
to be captured as part of a treatment setup.
After depressing of this key, the parameter
just modified will be captured and the next
treatment parameter to be defined will be displayed. After all
parameters have been entered, pressing the “Up Arrow” key starts the
treatment.
An enter key is not used during a treatment. However, depression of
an enter key when not delivering a treatment, will cause the treatment
setup process to begin. Finally, pressing the enter key just after
all parameters are defined for a treatment, but before starting the
treatment, will cause a return to the beginning of the treatment setup
process (polarity, dose and intensity definitions).
9.
CASE:
The Dynatron ibox is enclosed in a plastic case. This case
should not be opened by the user at any time. Clean the outer
surface of the case with a slightly damp or lightly moistened cloth.
Mild household cleaners work well on the case.
CAUTION
Do not use cleaners on the display window. Do not spray solutions directly
on the device. First moisten the cloth and wipe off the device. Solvents,
caustic solutions and harsh or abrasive cleaners must never be used.
Top Side View
Output Jack
Case