Dynapac DRP45DX, Руководство по эксплуатации

Страница: 92 / 124

9. Close the fuel line in front of the fuel filter.
10. Clean the area around the fuel filter.
11. Loosen the hose clamps on the fuel filter.
12. Pull the hoses off the fuel filter.
13. Install the new fuel filter and observe the flow direction
(arrow).
14. Reattach hoses and hose clamps.
15. Open the fuel line again.
16. Bleed the fuel system
Ä
Chapter 5.3.3 ‘Bleeding the fuel
system’ on page 53 .
17. Dispose of fuel and filter in line with environmental regula-
tions.
8.9.5 Replacing the air filter
NOTICE!
Danger of engine damage!
– Do not start the engine after having removed
the air filter.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.4
‘Parking the machine in secured condition’ on page 63 .
2. Allow the engine to cool down.
3. Remove the cap (3).
4. Unscrew the knurled nut (2) and pull out the air filter (1).
5. Clean the cover.
6.
NOTICE!
Danger of engine damage!
– Prevent dirt from getting into the air
intake opening.
– Do not clean the air filter housing with
compressed air.
Clean the filter housing with a clean, lint-free cloth.
7. Replace the air filter.
Replacing the main fuel filter
B-695-0103
Fig. 100
Fig. 101
Maintenance – Annually / every 250 operating hours
DRP45DX 92