Dynapac DRP45DX Скачать руководство пользователя страница 75

Страница: 75 / 124

The viscosity index must be at least 150 (observe information of

manufacturer).

8.3.4.2

Bio-degradable hydraulic oil

The hydraulic system can also be operated with a synthetic ester

based biodegradable hydraulic oil.

The biodegradable hydraulic oil Panolin HLP Synth. 46 or

Plantohyd 46 S meets all the requirements of a mineral oil based

hydraulic oil according to DIN 51524.

In hydraulic systems filled with biodegradable hydraulic oil, always

use the same oil to top up and do not mix oil types.

When changing from mineral oil based hydraulic oil to an ester

based biologically degradable hydraulic oil, you should consult the

lubrication oil service of the oil manufacturer, or our customer

service for details.

NOTICE!
Danger of damage to the hydraulic system!

–

After the changeover check the hydraulic oil fil-

ters increasingly for contamination.

–

Have regular oil analyses performed regarding

the water content and mineral oil.

–

Replace the hydraulic oil filter at the latest after

500 operating hours.

Maintenance – Fuels and lubricants

DRP45DX

Содержание DRP45DX





























































































































Результаты поиска

Содержание DRP45DX

Отзывы:

Dynapac DRP45DX, Руководство по эксплуатации, Страница: 75 / 124

Результаты поиска

Содержание DRP45DX

Отзывы: