Dynapac DRP45DX, Руководство по эксплуатации, Страница: 66 / 124

7.1 Loading the machine
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lashing points that are damaged or impaired in any
way.
Only use lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting tackle: see operating weight
Ä
Chapter 2 ‘Tech-
nical data’ on page 11 .
Always use appropriate lashing tackle at the lashing points.
Use lashing tackle only in the specified loading direction.
Lashing tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in an
uncontrolled way. If necessary, hold the load steady with guide
ropes.
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.4 ‘Parking the machine
in secured condition’ on page 63 .
2. Allow the engine to cool down.
3. Make sure that the protection hood is fastened correctly
Ä
Chapter 8.2.1.2 ‘Closing the protection hood’ on page 72 .
4. Move the steering rod to an upright position and engage the
locking pawl lever.
5. Attach the lifting tackle to the designated lifting eye (1).
6.
DANGER!
Danger to life caused by suspended
loads!
– Do not step or stand under suspended
loads.
Lift the machine carefully and set down again at the intended
location.
B-695-0101
Fig. 60
1
B-692-0246
Fig. 61
Loading/transporting the machine – Loading the machine
DRP45DX 66