Dynapac DRP45DX, Руководство по эксплуатации

Страница: 84 / 124

5. Insert two M8 screws according to the required hole spacing
and tighten them with two M8 nuts.
6. Insert the locking lever into the V-belt pulley.
7. Unscrew the V-belt pulley (1).
8. Replace the V-belt (3).
9. If necessary, reassemble the spacers (2) that may have been
removed.
10. Position the V-belt pulley and screw in the screws.
11. Insert the locking lever into the V-belt pulley and tighten the
V-belt pulley, tightening torque: 35 Nm (26 ft
·
lbf).
12. Check the centre distance (x) between the centrifugal clutch
(1) and the V-belt pulley (2).
ð
Nominal value: 384
±
1 mm (15.1
±
0.04 in)
If the centre distance is incorrect, contact
our customer service.
B-695-0146
Fig. 79
B-695-0137
Fig. 80
1
2
3
B-695-0137
Fig. 81
B-692-0183
x
1
2
Fig. 82
Maintenance – Annually / every 250 operating hours
DRP45DX 84