Dynapac DRP45DX, Руководство по эксплуатации

Страница: 53 / 124

5.3.2 Checking the fuel level; topping up fuel
NOTICE!
Danger of engine damage!
– Monitor the entire refuelling process.
– Contaminated fuel can cause malfunction or
even damage of the engine. If necessary, fill in
fuel through a screen filter.
– Use only fuel of the permitted specification
Ä
Chapter 8.3.2 ‘Fuel’ on page 73 .
Protective equipment: n Working clothes
n
Safety shoes
n Protective gloves
1. Clean the area around the filling port.
2. Remove the cover.
3. Fill in fuel through a funnel with screen filter.
4. Close the cap.
If the fuel tank has been completely emptied or
when filling the fuel tank for the first time, the fuel
system must be bled before starting Ä Chapter
5.3.3 ‘Bleeding the fuel system’ on page 53.
5.3.3 Bleeding the fuel system
Bleeding the fuel system is necessary in the following situations:
n After an engine shut-down due to an empty fuel tank.
n
After filling the fuel tank for the first time.
n After several unsuccessful starting attempts.
n
After replacing the fuel filter.
Protective equipment: n Working clothes
n Safety shoes
n
Protective gloves
The fuel tank must be full when bleeding.
1. Check the fuel level; top up if necessary.
B-SYM-1069
Fig. 38
Diesel
B-695-0099
Fig. 39
Checks prior to start up – Daily maintenance
DRP45DX 53