Dynapac CS1400, Инструкция по эксплуатации

Страница: 96 / 118

Maintenance measures - 500 h
4812162501_F.pdf 2018-04-25
Radiator - Check/Cleaning
Fig. Engine compartment
1. Water cooler
2. Hydraulic oil cooler
1
2
Check that air can pass unobstructed through the
radiators (1) and (2).
Clean a dirty radiator using compressed air or a
high-pressure water jet.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
Be careful when using a high-pressure washer -
do not place the nozzle too close to the radiator. Be careful when using a high-pressure washer -
do not place the nozzle too close to the radiator.
Wear protective goggles when working with
compressed air or high-pressure water jets. Wear protective goggles when working with
compressed air or high-pressure water jets.
Hinges, controls - Lubrication
Fig. Engine compartment
1. Hinge
1
Lubricate both hinges (1) on the engine compartment
doors until grease penetrates through.
Grease the hinges of the cab door in the same way.
Lubricate the hinges of the front and rear spotlight
covers with a few drops of oil.
Lubricate the forward/reverse control wires by the
control arm of the hydraulic pump. Apply a few drops
of oil to the mouth of the control sleeve.
86