Dynapac CS1400, Инструкция по эксплуатации

Страница: 67 / 118

Miscellaneous
4812162501_F.pdf 2018-04-25
Brake release pump
1
Fig. Engine compartment
1. Brake release pump
Chock the drums to prevent the roller from moving
when the brakes are hydraulically disengaged. Chock the drums to prevent the roller from moving
when the brakes are hydraulically disengaged.
The release pump for the brakes is located in the front
part of the engine compartment.
2
3
Fig. Brake disengagement pump
2. Pump arm
3. Brake release button
For towing:
Press in the brake release button (3).
Pump with the arm (2) until the brakes are released.
The roller can now be towed.
After towing, pull the brake release button (3) out
to apply the brakes. After towing, pull the brake release button (3) out
to apply the brakes.
If the diesel engine is once again in working order
and starts, the brakes are reactivated if the supply
pressure is reached. If the diesel engine is once again in working order
and starts, the brakes are reactivated if the supply
pressure is reached.
The machine must not be moved at a speed
higher than 3 km/h (2 mph), and no more than 300
meters (330 yards). Otherwise there is a risk of
damaging the drives. The machine must not be moved at a speed
higher than 3 km/h (2 mph), and no more than 300
meters (330 yards). Otherwise there is a risk of
damaging the drives.
57