Dynapac CS1400, Инструкция по эксплуатации

Страница: 49 / 118

Operation
4812162501_F.pdf 2018-04-25
Operation
Before starting
Battery disconnector/ Electrical battery
disconnector (Option) - Operation
3
1
Fig. Battery bay in front beam
1. Battery disconnector
2. Power socket, 12V
3. Key
2
Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The battery disconnector is located in the front beam.
Turn the key (3) to the On position. The roller is now
supplied with power.
The machine may be fitted with an electrical battery
disconnector. The disconnector function is then
integrated in the ignition lock and there is no key (3) in
the battery bay.
The engine cover must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary. The engine cover must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary.
Operator’s seat - Adjusting
2
1
3
Fig. Operator position
1. Backrest inclination
2. Length adjustment
3. Weight adjustment
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows :
- Backrest inclination (1)
- Length adjustment (2)
- Weight adjustment (3)
To adjust weight. Weight is increased by pushing the
lever down until the required weight is achieved. To
lower weight, push the lever down to its lowest
position and release. The seat is now set for the
minimum weight.
39