Dynapac CC 722C, Руководство по обслуживанию

Страница: 20 / 28

18 CC 722/722C M722EN2
1
3
Fig. 22 Pump drive
1. Filler plug and dipstick
Make sure that the roller is level.
Switch off the engine and apply the
parking brake/reserve brake.
Unscrew the filler plug/dipstick (1) on the right side of
the pump drive. The oil level must be within the marked
area on the dipstick.
Top off with oil through the filler plug (1) until the oil level
is within the marked area. See page 3 for the grade of
oil.
EVERY 250 HOURS OF OPERATION (MONTHLY)
2
1
Drum drive
– checking the oil level
Place the roller on a level surface with the filler plug (1)
at its highest point.
Wipe clean around the plugs.
Remove the plugs and ensure that the oil level reaches
the level plug (2).
Top off with transmission oil as required, see the lubri-
cant specifications on page 3.
Pump drive
– checking the oil level
Fig. 23 Drum drive
1. Filler plug
2. Level plug
3. Drain plug
WARNING