Dynapac CC 722C, Руководство по обслуживанию

Страница: 5 / 28

3 CC 722/722C M722EN2
LUBRICANTS, SYMBOLS
Other fuel and lubricants are required for operation in extremely high or extremely low
ambient temperature. See the “Special instructions” chapter, or consult Dynapac.
Always use high-quality lubricants in the recommended amounts. Too much grease or oil can
cause overheating and subsequent increased wear.
Engine, oil level Air filter
Engine, oil filter Battery
Hydraulic reservoir, level Sprinkler
Hydraulic fluid filter Sprinkler water
Drum, oil level Recycling
Lubricating oil Fuel filter
Air pressure Sprinkler, tyres
Coolant, level Transmission, oil level
CAUTION
CAUTION
ENGINE OIL
ambient temperature
-10°C to +50°C (14°F-122°F) Shell Rimula SAE 15W/40 or equivalent.
HYDRAULIC FLUID
ambient temperature
-10°C to +40°C (14°F-104°F) Shell Tellus TX68 or equivalent
above +40°C (above 104°F) Shell Tellus TX100 or equivalent
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID When it leaves the factory, the machine may be filled
with biologically degradable fluid. The same type of
fluid must be used when changing or topping off.
DRUM OIL
ambient temperature
-15°C to +40°C (5°F-104°F)
API, GL-5 SAE 80W/90 HD
above +40°C (above 104°F) Shell Spirax HD85W/140 eller motsvarande
TRANSMISSION OIL
ambient air temperature
-15°C to +40°C (5°F - 104°F) API, GL-5 SAE 80W/90 HD
above +40°C (above 104°F) Shell Spirax HD85W/140 eller motsvarande
GREASE SKF LGHB2 (NLGI Class 2) or equivalent for the articulated
joint. Shell Retinax LX2 or equivalent for other grease points.
FUEL See engine manual.
COOLANT Shell Anti-Freeze 402 or corresponding.
mixed 50/50 with water Anti-freeze protection down to about -35°C (-31°F).