Dynapac CC 722C, Руководство по обслуживанию

Страница: 10 / 28

8 CC 722/722C M722EN2
MAINTENANCE MEASURES
The periodic measures should be performed primarily
after the specified hours of operation. Use the daily,
weekly, etc. time periods only where this is not possible.
Remove all dirt before filling, when checking
oils and fuel, and when lubricating with oil or
grease.
The engine manual specifies additional ser-
vice/maintenance instructions which relate to
the diesel engine.
CAUTION
CAUTION
Items in Measure See page Comments
fig. 1
Before starting up
21 Check oil level in the engine See engine manual
15 Check coolant level 10 See engine manual
15 Check for free circulation of cooling air 10 See engine manual
22 Drain the water trap on the fuel filters 10 See engine manual
Test the brakes 10
2 Inspect and clean the sprinkler system 11
7 Check the scraper setting 12
12 Check level of the hydraulic reservoir and top
off with hydraulic fluid as required
13
3 Refuel 13
Every 10 hours of operation (daily)
Items in Measure See page Comments
fig. 1
14 Check tire pressure 14
20 Clean the filter element in the air cleaner 14
Check that hoses and connections are tight
8 Check rubber elements and bolted joints 15
11 Grease the articulation joint and the steering
cylinder mounts
15
12 Check the hydraulic reservoir cover/breather 15
13 Check the battery 16
22 Drain the engine fuel pre-filter 16
After the first 50 hours of operation, change all the lubricating oils,
but not the hydraulic fluid.
Every 50 hours of operation (weekly)