Dynapac CC 722C, Руководство по обслуживанию

Страница: 13 / 28

11 CC 722/722C M722EN2
EVERY 10 HOURS OF OPERATION (DAILY)
4
Use only clean water in the water tanks. Ensure that
the strainer (1) in the filler is fitted. Take out the strainer
and clean it as required.
1
2
3
1
1
3
2
Sprinkler system
– Checking, cleaning
Fig. 5 Water tank
1. Strainer
Fig. 6 Sprinkler system
1. Stop cock
2. Pressure filter housing
3. Water pump
Fig. 7 Nozzle
1. Strainer
2. Rubber seal
3. Nozzle
4. Holder
Close the tap (1) and remove the housing of the
pressure filter (2), to clean the strainer and housing.
Check that water is sprayed evenly over the entire
surface of the drum. If any nozzle is not spraying
evenly, release the holder and take out the strainer,
rubber seal and nozzle; see figure 7 showing how the
parts are fitted.
Clean using compressed air or water.
Wear protective goggles when working
with compressed air.
WARNING