Dynapac CC 722C, Руководство по обслуживанию

Страница: 15 / 28

13 CC 722/722C M722EN2
1 2
1
Hydraulic reservoir
– checking the fluid level
Place the roller on a level surface and check the fluid
level in the sight glass (1).
Top off with hydraulic fluid through the filler hole (2) if
the level is 20 mm (0.8 in) or more below the upper
edge of the sight glass.
Check that the strainer in the filler hole is intact.
Fig. 11 Hydraulic reservoir
1. Sight glass
2. Filling
Stop the diesel engine while refueling. Short
(press) the filler gun against a non-insulated
part of the roller before refueling, and against
the filler pipe (1) while refueling is in progress.
Refuel at the end of each working day up to the lower
edge of the filler pipe on the fuel tank.
Use diesel fuel recommended by the engine
manufacturer.
Fig. 12 Refueling
1. Filler pipe
Fuel tank
– refueling
WARNING
CAUTION
EVERY 10 HOURS OF OPERATION (DAILY)