Dynapac CC 722C, Руководство по обслуживанию

Страница: 21 / 28

19 CC 722/722C M722EN2
Applies to both sides of the drum:
Place the roller on a level surface so that the dipstick
(1) is at the top of the frame beam.
The oil level should reach up to the level plug (3).
Top off with oil as required, but not more than up to the
level plug. Fill through the filler hole (2).
Drum
– checking the oil level
1
3
2
EVERY 500 HOURS OF OPERATION (EVERY THREE MONTHS)
Controls and pivoted joints
– lubrication
1
1
Fig. 25 Steering column
1. Lubrication nipple
Grease the hinges on the engine hood and side covers,
and grease the bearings of the control table.
Lubricate other pivoted joints with oil.
Fig. 26 Hinges on engine hood
1. Lubrication nipple
Fig. 24 Drum
1. Dipstick
2. Filler plug, M30
3. Level plug, M12