17
Copyright © 2014 - 2017 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Version 1.8
Sysinfo & Log
The „Sysinfo & Log“ tab contains internal information about the current state of JCD as well as the ArtNet/DMX log. To open it, click
on „ArtNet/DMX Log“ directly above the „Sysinfo“ section.
The log shows information about all incoming ArtNet/DMX data on the selected network interface. (see the network configuration
section for further information) Only the last 50 log entries are available.
For the current universe, the first received packet as well as every change in DMX data will be shown, with the channels relevant for
JCD operation being highlighted. If a change in DMX data results in a command execution, the executed command is also shown in
the log. For every 200 packets without a change in DMX data, a single log message will appear.
For ArtNet/DMX data in other universes, an initial discovery message as well as a repetition message every 200 packets will be shown.
