background image

3

Copyright © 2014 - 2017 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. 

Version 1.8

Introduction

Thank you for having chosen a JCD unit. If you follow the instructions given in this manual, we are sure you will enjoy this device 
for a long period of time.

For your own safety, please read this user manual carefully before you initially start-up. 

 

Every person involved with the installation, operation and maintenance of this device has to: 

-  

be qualified 

-  

follow the instructions of this manual 

-  

consider this manual to be part of the total product 

-  

keep this manual for the entire service life of the product 

-  

pass this manual on to every further owner or user of the product 

-  

download the latest version of the user manual from our website

In the case you have questions about our product or need support during assembly and installation please contact our support!

Dynamic Projection Institute, Herstellungs und Vertriebs GmbH

Renngasse 4/1/1, A-1010 Vienna

Email: [email protected]

Web: www.dynamicprojection.com

Phone: +43 1 996 2028 (Mo. - Fr. from 9:00 to 18:00h)

Commercial Register: FN400806x

Warranty

DPI represents and warrants: 

-  

that all Products will be in a fully working and commercially available condition. 

-  

for twelf (12) months from the date of proof of purchase by a customer, unless otherwise agreed.

Warranty is void if the operator of the device violates any safety and / or operation advice in this manual.

Содержание JCD























Отзывы: