13
Copyright © 2014 - 2017 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Version 1.8
Focus & Zoom Control
After JCD has been configured and calibrated, the lens focus and zoom can now be controlled using the “Focus & Zoom Control” tab.
To adjust the lens zoom or focus, move and release the “Zoom” and “Focus” sliders. While the lens Is moving, the status will change
to “BUSY”. As soon as the selected position has been reached, the status will switch back to “IDLE”.
Below the status, the current zoom and focus positions are shown. If either position information is displayed as “undefined” (which is
the case before calibration or after a JCD halt/restart), focus / zoom will be automatically reset once before moving.
