Dynamax Dynamet 5, Руководство пользователя

Страница: 12 / 83

Dynamet 5
11
2.0 SOFTWARE INSTALLATION
Dynamet 5 is a completely integrated weather station capable of reading a variety of scientific
grade weather sensors. Sensor readings are then stored in data loggers memory of 1MB
memory. In addition removable storage modules are available for expanding the available data
memory. Data from the logger is available for down load using data logger support software.
Down loaded data from the logger contains measurements from individual sensors at the
interval defined in the program and calculated ETP in mm/hour using Lascano-Van Bavel
Evapotranspiration (ETP) algorithm on an hourly basis and accumulated daily ETP mm/day.
Dynamet 5 weather station is based on CR1000 data logger. Hence can be operated using any
of the following data logger support software,

PC400

LoggerNet
For Procedure to connect, program download data refer to chapter 5. In this manual we
describe working with Dynamet 5 weather station using PC400. As described above full
capabilities of Dynamet 5 weather station is obtained by using two sets of software programs,
1. Data logger support software - PC400 (Logger Net software for advanced
applications
2. Data logger program Dynamet 5.cr1 to load in to CR1000 data logger for reading
variety of weather sensors, compute weather data from electrical measurements
and store to logger memory.
3. In addition custom weather station configurations may require a modified version
of Dynamet 5.cr1 program.