Dynamax Dynamet 5, Руководство пользователя

Страница: 9 / 83

Dynamax Inc
8
1.1 Unpacking, Bill of materials
Using the following bill of materials, open the cartons and check off the items to see that all
material was received in good condition. Notify Dynamax no later than 10 days after receipt if
there are any discrepancies. Notify the shipper and Dynamax immediately if goods are
damaged in transit by mishandling. The white Dynamet 5 enclosure contains the CR10000
logger, voltage regulator for solar panel (some times voltage regulator may be installed at the
back of the solar panel). Sensor cables with sensors installed on the end, and 5' RS232
interface cable, exit from the bottom of the system enclosure. Each sensor lead is labeled with a
sequence number.
Be careful at all times not to step on or otherwise bend the gage connector leads.
A CD Rom Containing your programs includes:
PC400 software supplied with Dynamet 5 systems. A PC400 manual is included in a pdf form.
Dynamet 5 data logger programs directory with the standard program, and a test program.
A directory with your custom program tuned for your weather application, to run the logger with
additional sensors, and a specific solar sensor supplied for your weather station.