Dynamax Dynamet 5, Руководство пользователя

Страница: 28 / 83

Dynamet 5
27

When GPS Speed and GPS heading are available and GPS Speed transitions are above
5m/s, Corrected Wind Speed shall be computed as the True Wind speed using GPS
speed and GPS heading.

When GPS Speed is available and GPS Speed transitions are below 4m/s, Corrected
Wind Speed shall be computed as the True Wind Direction using GPS speed and
Compass heading.

Insert the MaxiMet Support Tube inside the mast and secure with bolt. The support tube
will fit snug inside the mast for added stabilization as shown above.

To reach a designed height of 2m, the distance between the ground to the top of the
stand should be 40”. On the legs of the tripod, the distance from the bolt to the end of the
bracket should be 18”

Install the MaxiMet GMX500 on top of the support tube using the supplied 3 x M5 screws.
Before wiring the GMX500 into the data logger, run the cable through the designated hole
in the support tube as shown below.
Support tube into mast
2m from the ground