Dynalab Test Systems
NX Tester User’s Guide
7
Copyright 2011
Revised 04/27/2011
MEM-CARD > TESTER
ONE FILE
>ALL FILES
MEM-CARD > TESTER
>TESTER > MEM-CARD
SERVER > TESTER
MAINTENANCE
TESTER > MEM-CARD
>ONE FILE
ALL FILES
A7789008
1358 bytes
15-Jun-2004 12:34
13A53CD3 2/9
TESTER > MEM-CARD
ONE FILE
>ALL FILES
TESTER > MEM-CARD
>ONE FILE
ALL FILES
ALL FILES is used to transfer all the files on the NX Memory Card to the NX Tester’s memory.
TESTER > MEM CARD
The TESTER > MEM_CARD selection is used to transfer files from the NX Tester’s memory to the
NX Memory Card. After selection of this function, a menu is displayed prompting for ONE FILE or for
ALL FILES.
ONE FILE is used to transfer a single file from the NX Tester’s memory to the NX Memory Card.
When ONE FILE is selected, the NX Tester displays information about each program. This includes
the program name, the size of the program, the date and time the program was last saved, the checksum,
the program number in the list and the total number of programs. The UP and DOWN arrow keys can
be used to scroll through the program list. Once the desired program is displayed, the selection is made
by pressing the GREEN button.
ALL FILES is used to transfer all the files from the NX Tester’s memory
to the NX Memory Card.
NOTE:
Dynalab recommends use of the Memory Cards supplied by Dynalab, part number 5-1011.
All memory cards supplied by Dynalab are shipped with a FAT file system. Microsoft Windows will
allow the card to be re-formatted as FAT32 or as FAT. If it is necessary to re-format the card, do not
use FAT32 – the file system must always be formatted as FAT in order to operate properly with NX
Testers.
