28
NX Editor User’s Guide
Dynalab Test Systems
Revised 04/27/2011
Copyright 2011
NX Tester Feature Summary and Specifications
TESTS
Continuity
Scans the wire harness for continuity and shorts
Resistance (normal)
1 ohm to 2 Meg ohms
Resistance (Kelvin 4-wire)
.005 ohms to 100 ohms
Capacitance
100 picofarads to 500 microfarads
Diodes
Checks for proper orientation
Relays
Capable of active relay testing
Detection Switches
Accommodates special fixture detection switches
BASIC FEATURES
Program Storage
Provides 1.3Mb of program storage.
Detailed Errors
Errors are displayed using connector names, wire names, and wire
color on a 4-line x 20 character display.
Communications
Two RS-232 ports are standard, and two additional RS-232 ports are
optionally available to connect to printer, bar code scanner, extended
display, or multiport control unit.
External Control Interface
One control port accommodates the optional Control Port Module to
control a single device. Optional Multiport Unit available to allow
control for up to 24 devices.
Audible Tones
Provides a variety of user programmable tones for error notification
and special events.
ACCURACIES
Continuity Testing (normal)
1 ohm - 100 ohms: +/- 1 ohm, 100 ohms – 500K ohms: +/- 1%,
500K ohms – 2M ohms: +/- 5%
Continuity Testing (Kelvin)
.005 ohms – 0.5 ohms: +/- .005 ohms, 0.5 ohms – 100 ohms: +/- 1%
Shorts Testing
1K ohms to 2M ohms +/- 20%.
Resistors
Same ranges and accuracies as Continuity Testing
Capacitors
Capacitance
Accuracy
Range Dielectric
type
+/- 5%, +/-10pF
100pF to 500uF
Tantalum
Aluminum Electrolytic
NPO/COG Ceramic
Mica
Polystyrene
Polycarbonate
Polyester
+/- 15%, +/- 10pF
100pF to 1uF
X7R Ceramic
5ZU Ceramic
+/- 20%, +/- 10pF
100pF to 500uF
Other dielectrics
