dynabook E10-S, Руководство по обслуживанию

Страница: 74 / 133

3 Diagnostic Programs 5. Appendix
Maintenance Manual Satellite Pro E10-S / dynabook E10-S 3-26
failed to set recv timeout: xx In-use API error
xx is the error code. test.
failed to set send timeout: xx In-use API error
xx is the error code.
Invalid in-address: xx In-use API error
xx it the IP address
sendto failed: xx In-use API error
xx is the error code.
Wrote xx bytes Communication data size unmatched
xx is the reception size
recvfrom failed: xx In-use API error
xx is the error code.
timed out. Time out occurred.
4-2-7 CPU Test
1) Test contents
1-1) The test gets how many CPU cores exist on the PC.
1-2) The test executes ALU (Arithmetic Logic Unit) test and FPU (Floating Point Unit) test five times on the process.
1-3) The executes ALU test and FPU test five times on the each CPU core.
WPETD supports to test up to 8 cores.
If there is no problem with test 1-2 and 1-3, the test will get 1 Pass.
2) Test screen
▼
The current test … ALU or FPU
▼
Progress status … Test progress by the progress bar.
3) Test result
■
In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
The pass count is shown in the “PASS” field.
■
In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
The pass and error count are shown in the “pass” and ”error” fields respectively.
The detail of the error is recorded in the log file as follows.
Message Explanation
The ALU test made an error. An error occurred during ALU test.
The FPU test made an error. An error occurred during FPU test.
4-2-8 GRAPHICAL DISPLAY Test
The current test
detail
Progress status