dynabook E10-S, Руководство по обслуживанию

Страница: 114 / 133

4.1 General 4 Replacement Procedures
4-1 Maintenance Manual Satellite Pro E10-S / dynabook E10-S
4
概述
4.1 General
This chapter explains how to disassemble the computer and replace Field Replaceable
Units (FRU). Some replacement procedures may not require you to remove all the
surrounding FRU to replace only one FRU. The chart below shows the FRU in the order in
which they should be removed in a top-down manner, irrespective of their physical locations.
The FRU shown in the top area of the chart should normally be removed before removing the
FRU shown in the bottom area. To replace the FRU, first identify the suspect FRU for the
system failure. Next, according to this chart, determine the FRU that need to be removed
before removing the suspect FRU. After you determine those FRU, go to the appropriate
sections according to the section numbers shown in the boxes. Then start removal and
replacement.
4.12
LCD Panel
4.11
RTC Battery
4.9
Speaker
4.6
Heat sink
4.4
SSD
4.3
Battery Pack
4.8
I/O Board
4.7
System Board
4.5
Rotating shaft
& LCD Module
4.2
Base Enclosure
4.10
Touch pad