dynabook E10-S, Руководство по обслуживанию

Страница: 67 / 133

5. Appendix
3 Dia
gnostic Programs
3-19 Maintenance Manual Satellite Pro E10-S / dynabook E10-S
4-1-6 BATTERY OFF Test (Setting)
1) Test contents
This test sets the battery off. And it run only once at the end of all other tests.
2) Test screen
2) Test screen
Check method:
a.
Check the [Set Battery Off At the End] check box as introduced in “ 3-3-2 Each item for the operations ”.
b.
The battery off (Shipping Mode) test/setting starts as above at the end of all other tests, and it will exit automatically when
finished.
3) Test Result
If the test finished and exit automatically, then the test/setting result is OK.
If there is error, then the test/setting will pause and the result is NG.
■
In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■
In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
4) Test file
BatteryOff.exe: Test program.
4-2 Aging Tests
The following items are grouped as the Aging tests.
Aging Tests: HDD PHYSICAL, HDD LOGICAL, MEMORY, USB STORAGE, SD STORAGE, WIRED LAN, CPU, GRAPHICAL DISPLAY, Timer
These “Aging Tests” are integrated in WPETD (WinPETD.EXE) itself.
Aging Tests start when the all selected Non Aging Tests have finished.
You can run these Aging Tests more than once by setting the “LOOP COUNT”.
If you check “Multitask” check box, all Aging Tests you select run simultaneously. The tests run repeatedly until the last one reaches
the “LOOP COUNT”.
If you un-check “Multitask”, the Aging Tests you select run one by one from the top to the bottom in the list.
Then the cycle will repeat the number of times you set in the “LOOP COUNT”.
Regardless the “LOOP COUNT” you set, if an aging test encounters total 10 errors during the execution, the aging test will terminate.
4-2-1 HDD PHYSICAL Test
1) Test contents
Note: After the test/setting, you can only turn on the PC after power adapter (AC) plugged-in, and
this is what “Shipping Mode” for.