18
Dymax Edge-Carry Conveyor User Guide
Belt Speed Adjustment
1.
Turn the Conveyor on by means of the Power Switch. Adjust Chain speed by unlocking and turning the
Speed Control Knob (Figure 28). Chain speed is indicated on the Belt Speed Indicator Display (Figure 29).
The Chain Speed Knob is a Ten-Turn Potentiometer and is equipped with a lock.
Figure 28. Speed Control Knob
Figure 29. Belt Speed Indicator Display
2.
When the Conveyor is operating, and the Chain is in motion, turn each Power Supply on. Allow five
minutes for the Lamps to reach full output intensity. If required, adjust the speed of the Exhaust Blower as
required to optimize Lamp temperature.
3.
The Exhaust Blower is factory set during final system testing for the Conveyor model ordered. If
adjustment is required, remove the Access Panel (Figure 30) from the front of the Exhaust Blower
Housing, unlock the Potentiometer Knob (Figure 31 & Figure 32), adjust the Exhaust Blower speed setting,
and relock the Speed Control Knob. The range of the Exhaust Blower Potentiometer is 0.0 to 0.85 turns.
Reinstall the Access Plate when adjustments are complete.
4.
The Edge Carry Conveyor is ready for operation.
Figure 30. Remove Access
Panel
Figure 31. Unlock
Potentiometer Knob
Figure 32. Potentiometer
Knob
