12
Dymax Edge-Carry Conveyor User Guide
Unpacking
Unpacking and Inspecting Your Shipment
Your conveyor arrived in one or two boxes. Inspect the boxes for damage and notify the shipper of box
damage immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are missing, contact your local
Dymax representative or Dymax Customer Support to resolve the problem.
Parts Included in the Edge-Carry Conveyor
▪
Edge-Carry Conveyor
▪
Lamp and power source options dependent on model number ordered (listed in Table 2)
▪
Two pairs UV goggles
▪
Dymax Edge-Carry Conveyor User Guide
Setup and Interconnect
Conveyors Using Dymax EC-Series Flood Lamps
Refer to the Dymax EC-Series Flood Lamp User Guide for detailed Irradiator and Power Supply information.
1.
Uncrate and assemble the C
onveyor’s
optional Mounting Cart if purchased.
2.
Uncrate the Conveyor and remove the protective coverings.
3.
Place the Conveyor on a convenient work surface or if purchased, on the optional Mounting Cart.
4.
Install the Exhaust Ventilation Stack on the Blower Motor’s Outlet Flange (
Figure 4). Secure the Exhaust
Ventilation Stack with the three fasteners provided.
5.
Unpack the EC UVCS Flood Lamp System(s) (Figure 5). Each Flood Lamp System includes a Power Supply,
Reflector Assembly, a 400-Watt Lamp, Lamp Connector Cord, and a Power Cord.
