dye NT11, Руководство пользователя

Страница: 21 / 22

OTHER CATEGORIES
DOUBLE FEEDING
•
If more than one ball is feeding at a time into the breech of your NT11, check to see if the ball detents are
stuck behind the eye pipe. To make sure your ball detents and eye pipe are properly
assembled see pages 30 and 31.
• Make sure the ball detents are not excessively worn.
BREAKING PAINT
•
Make sure you use high quality paintballs and that they are stored according to the manufacturers instructions.
• Check that the
014 O-ring
on bolt tip is in place and in good condition.
• Make sure your loader is working correctly and that the rate of fire is not set higher than the maximum
feed rate of the loader.
• Replace the spool spring
• Make sure the ball detent system is working properly. See page 31.
NOTES:
TROUBLESHOOTING GUIDE
W W W . D Y E P A I N T B A L L . C O M W W W . D Y E P A I N T B A L L . C O M
38 39