dye NT11, Руководство пользователя

Страница: 14 / 22

STICKY GRIP
GRIP REMOVAL
5. Pull the grips toward the barrel tip. 6. In doing so, you will have released the last three
locking tabs that are under the molded finger grooves.
W W W . D Y E P A I N T B A L L . C O M W W W . D Y E P A I N T B A L L . C O M
24 25
7. Repeat instructions for reverse side and slide the
grips off the frame.
INSTALL NT11 STICKY TOOL-LESS GRIPS
• Insert the bottom rear locking hook into the
retaining hole at the bottom rear of the UL frame.
• Lock the hook into place by sliding the grip
panel forward.
• Press the three locking tabs under the
molded finger groves into the corresponding
slots on the frame’s front strap.
• Pull the top of the grip panel back in order to allow
the front top locking hook to drop into the frame.
• Push the top of the grip panel forward to lock the
top front hook into place.
• Press down on the upper rear corner to seat the
upper retaining post into position.
STICKY GRIP
GRIP REMOVAL
1. Pull the upper back corner of the grips away from
the gripframe with your thumb. Allowing the rear tabs
to clear the frame.
3. The top portion of the grips should be free from the
gripframe.
4. Grab a hold of the inside of the grips with your
fingers, using your palm on the outside surface
of the grip.
2. While pulling with your thumb, using your index
finger, to push the grips toward you.