D9
13
solution tank
clean water is stored in solution tank, clean water is injected
into the solution tank (not more than 50
℃
), and the appropriate
detergent is added according to the nature of the dirt on the
surface
The machine has two water inlet (1) cleaning agent added, in
the absence of water pipe, bucket could be used to add
water.(2) is used for water supply pipe, water pipe can be
directly inserted into the mouth water
water level pipe
observation port for tank water quantity, through the water
level tube, you can know the water storage tank water
status;
cleaning agent concentration should be adjusted according
to the cleaning instructions.
The air inlet device is directly connected with the
water suction motor, and the water can not be
poured in the cleaning and maintenance process.
If there is water entering, it will cause damage to
the motor. In this case, you will lose the quality
guarantee!
please select the appropriate detergent according to the nature of
the dirt on the floor. Do not choose a high foaming cleanser;
Pay attention to the proportion of detergent, concentration,
excessive ratio will not only cause waste, but also affect the
machine and the environment!
3. clean water flushing suction
hose
（
1
）
Detergent inlet
（
2
）
Water pipe mouth
Water level pipe
