D9
17
D9 has excellent electronic brake damping system. As soon as the foot leaves the
electronic accelerator, the machine will enter the damping deceleration state, and there is
basically no need to use mechanical brake system in the operation process. When the
machine is going downhill, please pay attention to the following operation tips to ensure
your operation is more reliable.
Operation essentials:
(operators who have not participated in the operation training must
carefully read the operation essentials before use)
1. When going uphill or downhill, it is necessary to ensure that the machine is in normal
operation state (it is strictly prohibited to work on a slope exceeding 12 °).
2. Enter the downhill area, release the electronic accelerator on the right foot (the left foot can
not step on the brake), the machine will automatically enter the automatic damping brake
state, the machine will be very smoothly controlled in the deceleration state, without any
operation;
3. Key switch or power protection switch cannot be turned off during downhill. If it is
necessary to stop or need to be slower, mechanical brake can be used to assist.
4. The mechanical foot brake equipped with the machine is a parking brake device, which is
equivalent to the hand brake of the car. It is mainly used to stop the car and prevent the car
from slipping. Of course, it can also be used as an auxiliary brake in an emergency;
5. In normal operation, the machine does not need to use the brake device. The machine has
a complete automatic brake damping design. As long as the electronic accelerator is
released, the machine will stop quickly without worrying about safety issues.
6. This machine does not have a manual clutch switch, which saves the trouble of moving the
machine and pulling the switch under the back of the machine. As long as the key switch is
turned on, the machine is in preparation for automatic damping and operation at any time.
At this time, it is difficult for you to push the machine forward or backward. If you want to
push the machine manually, you can easily push it by turning off the key switch, which is
also the difference of D9.
7. When the machine is charged and placed, it is recommended to step on the brake pedal,
so as to ensure that the machine will never slide, and remember to release the brake during
operation.
It is strictly forbidden to turn off the key switch or the power protection switch
during downhill operation. If this operation is carried out, not only the machine
cannot be stopped, but also the speed will be accelerated suddenly because
the machine loses the brake damping protection.
When operating downward, under the premise of safety, the electronic
accelerator can be used to speed up the operation speed of the machine
properly. It must be operated carefully under the premise of skilled technology,
safety and reliability!
