D9
15
●
if you select the brush function operation, you can turn off the
drain system, so that the brush in the detergent area
repeatedly cleaning.
8. select the water flow according to the ground conditions (3)
and adjust the water transfer switch to the appropriate
position
9. select the direction of the machine, forward or backward, If
backward selected, the machine will shut off all operations
automatically, the brush system close and lift, the suction system
close and lift.
If forward selected, the brush system in the ready state
automatically enters the working state, and the water
suction system enters the working state.
10. The machine has a foot switch, a key control design, when you
complete the work settings, as long as the pedal down, the
machine will operate according to the set requirements.
when the machine starts to run, the operator
should check if the brush system is effectively
lowered, if the suction system normal, if the
water suction effect normal, If inappropriate,
timely adjustment.
brush system and suction system began
operating only the machine move forward, when
the machine backward, it will automatically stop
the brush system and suction system, the brush
and suction system automatically lift, then it can
backward.
In order to protect the machine, the suction
system and brush system are not started as long
as the direction of the machine is in a backward
position.
Cruise Control
Water volume regulation (3)
Back off
Wind Booster