D9
9
Battery maintenance content(once a month)
1. check the battery usage and charging according to
standard operation, must correct bad operation habits.
2. use a dry cloth or damp cloth to wipe the dirt on the
surface of the battery, and don't flush with water!
3. check whether the battery connection line is loose, if it
is loose, please fasten it in time.
4. check the battery appearance, check if the battery
appearance is heat deformation or bulging, if there is a
bulge immediately to supervisor and maintenance staff
report.
5. in summer please pay attention to check the battery
surface temperature when charging, and when found
the battery charging temperature is unusually high,
should promptly contact the maintenance personnel to
confirm whether normal.
Routine maintenance procedure for batteries:
1. open the recovery tank from the front part of the seat.
2. the support rod will slide in the chute. When the support
rod falls into the positioning groove, you can release your
hand. The support rod will keep the recovery tank in a
fixed position.
3. recovery tank is closed, the support rod shall be removed
from the positioning buckle to make the support rod return
to the chute. During the placing process, the hand shall
not leave the recovery tank, and the recovery tank shall
be placed stably
When the battery energy is exhausted, enter the charging state as soon as
possible, and if the battery is not charged for a long time, it will damage the
battery performance and life, make sure to pay attention to it.
When the machine has low voltage alarm after a few seconds will automatically turn off
the brush motor, but the machine can complete the dry ground, when the power is
reduced to a certain level, dry function will also be closed, only returned to the charging
area walk electricity, then please charge
as soon as possible!