DW DWC-MV95WiATW, Руководство пользователя

Страница: 9 / 78

4
2.2 Cabling
1. When using a PoE Switch or PoE Injector, connect the camera using an Ethernet
cable for both data and power.
2. When not using PoE Switch or PoE Injector, connect the camera to the switch
using an Ethernet cable for data transmission and use a power adapter to power
the camera.
Power requirements Power consumption
DC12V, PoE (IEEE 802.3af class 3).
Adapter not Included.
<9W
3. Use the diagram below to connect power, network and audio to the camera.
2.3 Managing the SD Card
1. To install the camera’s SD Card, locate the SD card slot at the base of the camera
module by loosening the lock screw at the base of the camera.
2. Insert class 10 SD/SDHC/SDXC card into
the SD card slot by pressing the SD card
until clicks.
3. To remove the SD card, press the card
inward until it clicks to release from the
card slot then pull out from the slot.