DW DWC-MV95WiATW, Руководство пользователя

Страница: 48 / 78

43
1. Check the “Enable” checkbox to activate motion-based alarms. If unchecked,
the camera will not send out any signals to trigger motion-based recording to
the NVR or CMS, even if there is motion in the video.
• Alarm Out: If selected, this would trigger an external relay output that is
connected to the camera on detecting a motion-based alarm.
• Trigger SD Card Snapshot: If selected, the system will capture images
on motion detection and save the images on an SD card.
• Trigger SD Card Recording: If selected, the video will be recorded on
an SD card on motion detection.
• Trigger Email: If “Trigger Email” and “Attach Picture” are checked
(email address must be set first in the Email configuration interface), the
captured pictures and triggered event will be sent to those addresses.
• Trigger FTP: If “Trigger FTP” and “Attach Picture” are checked, the
captured pictures will be sent to an FTP server address. Please refer to
the FTP configuration section for more details.
2. Set motion detection area and sensitivity. Click the “Area and Sensitivity” tab
to go to the interface as shown below.