DW DWC-MV95WiATW, Руководство пользователя

Страница: 16 / 78

11
Saturation: Set the degree of color purity. A high
Saturation
will make the image
appear more vibrant.
Sharpness: Set the resolution level of the image plane and the sharpness level of
the image edge.
Noise Reduction: Decrease the visual noise to make the image appear less
grainy due to electronic interference. Increasing this value will make the image
clearer but will also reduce the image resolution.
Defog: Clear the camera’s image in a foggy, dusty, smoggy, or rainy
environment.
Auto Iris: If your camera is using a motorized auto-focus iris lens, enable this
setting to allow the camera to automatically focus the image after zooming
in/out.
Backlight Compensation (BLC):

Off (default): disables the backlight compensation function.

HWDR: when enabled, a wide dynamic range will automatically adjust the
camera to provide a better image by balancing highly contrasted areas
simultaneously in the field of view by lowering the brightness of the bright area
and increasing the brightness of the dark area.
The stream will temporarily stop for a few seconds while the mode is changing
from non-WDR to WDR mode.

HLC: highlight compensation will lower the brightness of the entire image by
suppressing overexposed areas of the image and will reduce the size of the light
halo effect.

BLC: backlight compensation will adjust camera auto-exposure to increase
light exposure in the darkest areas of an image.
Antiflicker:

Off (default): disables the anti-flicker function. This is used mostly in outdoor
installations.

50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.
Smart IR: Select “ON” or “OFF”. This function will automatically prevent image
overexposure and underexposure by controlling the brightness of the IR lights.
White Balance: Adjusts the color temperature to match the color of the
environmental light source to give white objects a white coloration and a more
natural appearance.
Day/Night Mode:
• Auto: automatically change between Day mode and Night mode; depends
upon
Sensitivity
setting
• Day: forces camera to remain in the full-color mode
• Night: forces camera to remain in black/white image and