47
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to the Motion Detection (2.4.1) section for details.
3. Click the “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setup steps of the schedule are the
same as the schedule recording setup. (See
5.4.4
Alarm Out
This function is only available for some models. Go to Setup>Alarm>Alarm Out
interface as shown below.
Alarm Out Mode: Alarm linkage, manual operation, day/night switch linkage and
timing are optional.
•
Alarm Linkage: Select an alarm out name, alarm holding time at the
“Alarm Holding Time” pull-down list box and alarm type.
•
Manual Operation: Select the alarm type and click “Open” to trigger the
alarm immediately; click “Close” to stop the alarm.
Содержание DWC-MV95WiATW
Страница 73: ...68 7 2 Dimensions...