DW DWC-MV95WiATW, Руководство пользователя

Страница: 47 / 78

42
Click the “Clear” button to delete the alarm area. Click the “Save” button to save
the settings.
7. Set the schedule of the perimeter intrusion detection. The setup steps of the
schedule are the same as the schedule recording setup (See
Schedule
Recording ).
※
Configuration requirements of the camera and surrounding area
1. Auto-focusing function should not be enabled for perimeter intrusion
detection.
2. Avoid scenes with many trees or scenes with various light changes (like many
flashing headlights). The ambient brightness of the scenes shouldn’t be too low.
3. Cameras should be mounted at a height of 2.8 meters or above.
4. Keep the mounting angle of the camera at about 45°.
5. The detected objects should not be less than 1% of the entire image and the
largest sizes of the detected objects should not be more than 1/8 of the entire
image.
6. Make sure cameras can view objects for at least 2 seconds in the detected area
for accurate detection.
7. Adequate light and clear scenery are crucial to perimeter intrusion detection.
5.4 Alarm Configuration
5.4.1 Motion Detection
Go to Setup>Alarm>Motion Detection interface as shown below to set a motion
detection alarm.