DW DWC-MV95WiATW, Руководство пользователя

Страница: 43 / 78

38
To set up Line Crossing:
1. Enable the line crossing alarm and select the detection target.
Detection Target and sensitivity: select the object target types that will trigger
the Line Crossing alarm. All object types can be selected simultaneously. Please
select the detection objects as needed. If no object/target is selected, alarms will
not be triggered even if line-crossing detection is enabled.
•
Human: The alarm will be triggered if someone crosses the pre-defined
alarm lines.
•
Motor Vehicle: The alarm will be triggered if a vehicle with four or more
wheels (eg. a car, bus, or truck) crosses the pre-defined alarm lines.
2. Set the alarm holding time for how long the alert will remain active after
triggering.
3. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to the Motion Detection (2.4.1) section for details.
4. Click the “Save” button to save the settings.
5. Set the area and sensitivity of the line crossing alarm. Click the “Area and
Sensitivity” tab to go to the interface as shown below.