DW DWC-MV95WiATW, Руководство пользователя

Страница: 46 / 78

41
1. Select the target objects that will trigger the event and set the detection
sensitivity.
• Human: Select it and then alarms will be triggered if someone intrudes
into the pre-defined area.
• Motor Vehicle: Select it and then alarms will be triggered if a vehicle
with four or more wheels (e.g., a car, bus, or truck) intrudes into the
pre-defined area.
2. Set the alarm holding time for how long the alert will remain active after
triggering.
3. Set alarm trigger options. The setup steps are the same as Motion Detection.
Refer to the Motion Detection section for details.
4. Click the “Save” button to save the settings.
5. Click the “Area” tab to set the alarm area for perimeter intrusion detection as
shown below.
6. Set the alarm area number on the right side. Up to 4 alarm areas can be added.
Click the “Draw Area” button and then click around the area where you want to
set it as the alarm area in the image on the left side (the alarm area should be a
closed area).
Click the “Stop Draw” button to stop drawing.