Quasar CP Series HD PTZ Camera User and Installation Guide
76
Network Failure Detection
The network failure detection function allows the IP camera to periodically ping another IP device within the
network to detect a network failure, for example, if a video server is disconnected. By implementing local recording
(through a MicroSD card) if a network failure occurs, the camera can operate as a backup recording device for the
surveillance system.
Detection Switch
The Administrator can enable or disable the detection function by selecting
On
or
Off
.
Detection Type
Enter the IP address to ping and the time interval in minutes between pings.
Triggered Action
The Administrator can specify various alarm actions to be taken when an alarm is triggered. The options are listed
below.
Enable alarm output 1/2 -
Check these boxes to select the predefined type of alarm output in order
to enable alarm relay output when a network failure is detected.
