Quasar CP Series HD PTZ Camera User and Installation Guide
23
Tools Required:
Drill
Phillips and flat-head screw drivers
To Install the Standard or Compact Pendant Mount:
1.
Cut a cable access hole in the wall. Cables can also be threaded through the Cable Entry Board on the
Mounting Plate if desired.
Attach the Standard or Compact Pendant Mount to the wall using the appropriate screws and screw anchors
(not provided). For outdoor models, attach the waterproof gasket to the Pendant Mount.
Thread the cables through the Pendant Mount.
After threading the cables, block the entry hole with the supplied sponge to prevent insects from
entering. The sponge can be placed in one of two ways.
Thread the cables through the Indoor or Outdoor Mount Kit and attach the Mount Kit to the Pendant Mount
using the supplied screws and washers.
For outdoor cameras, adjust the waterproof gasket to the joint.
Connect the cables to the camera.
Secure the camera to the Indoor or Outdoor Mount Kit.
Ensure the camera is fixed completely, and that the thread holes on the camera’s fixing plate and the
Mount Kit are aligned.
Screw in the supplied screw and washer.
